E-XTEQ DS One, Руководство пользователя

Страница: 29 / 40

29/40
E-XTEQ DS ONE User Manual / Ref. MAN_DSOne_STL_EN_V1.3
Diagnostic PDI
7/9
START DIAGNOSTIC ////////
The tool will then ask you to point the
laser at the battery terminals to take
the temperature.
Press the
button on the keypad to
validate.
Do not point laser at individuals or reflective objects.
If a clamp connection issue is detected
this screen will be displayed, please
check that the 2 jaws of both clamps
are in contact and press the
button.
The DS One will check the clamps
connection, please wait.
When the voltage is detected and
stable this screen will be displayed.
Click on to start the diagnostic.
After three validation attempts, if there
is an issue with the clamp’s connection,
this screen will appear. Please refer to
the “Best Practices” section of the user
manual.
The tool will ask to press the
button to start the diagnostic.
If everything is connected properly
and voltage threshold acceptable, the
tool will complete the test.
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Information internal battery
Getting Started
Safety Reminders
Appearance and Dimensions
Presentation
Job Storage
Accessories
Best Practices
Positioning of the clamps
Connector longevity
Hybrid vehicles
Initial Setup
Power Cable Connection and Power On
Battery Cable Clamps Connection
Optimus
- Optimus installation
- Using Optimus
Update
Garage code (RRDI)
Settings
Preferences
WI-FI Connection
Other settings
Diagnostic PDI and REPAIR
Battery selection
- Using BK code
- Using VIN
Start Diagnostic
Other diagnostics
Results
Results storage
Support Information
Warranty
Technical specifications