Digital Projection
E-Vision Laser 6500 Series
Rev A April 2016
Page 17
Important Information
Inserting a new lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
The lens is shipped separately.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens fitted.
1.
Align the flange and position it
correctly at an 11 o’clock angle
as shown in the illustration, then
firmly push the lens into the
socket
2. Turn the lens clockwise until it
clicks into place.
Flange
