e-TWOW S2 GTS, Руководство пользователя

Страница: 16 / 128

15
EN
• After setting, press to confirm; release the left EBS brake, the settings are
automatically saved.
3. Setting of P0-P3, the same as the above steps
4. Clear the total mileage setting
• Switch to P4
• Press, release the button after beeped.
•
Press 3 seconds, after beeped the total mileage is zero clearing; then re -
lease the button and the left EBS brake.
4. Instructions
• Non-zero start function: when the scooter is stationary, press the right accelera -
tion handle, the scooter will not accelerate. When the initial speed of the scooter
is above 4km/h, press the right acceleration handle, the scooter will continuously
accelerating.
• Mechanical brake: the scooter keeps no power while the brake lever is tightly
pressed.
• EBS brake: when only the left EBS brake is pulled to the bottom, the scooter
provides smooth resistance according to the strength of EBS. When the left EBS
is pulled to the bottom, and the right acceleration handle is also pulled to the
bottom, the scooter provides reverse power, shortens the braking distance and
increases the resistance.
• Power on: press the power button for 3 seconds, the scooter will turn on. Power
off: press the power button for 3 seconds, the scooter will turn off. Automatic
turn off: when the scooter has no EBS signal and the speed is 0, keep it for 15
minutes, and then it will automatically turn off after the horn emits three beeps.