background image

                                                                                                                                                                                         

                                                                                                    19

      User Manual for the Wireless LAN Card 

4.6 Advance Tab 

 

4.6.1 Drop Menu Section 

Wireless mode: Choose 802.11b only mode or 802.11b/g mix mode. 

• 

Ad Hoc mode: When starting Ad Hoc network, you can specify 802.11b only mode or 
802.11b/g mix mode. 

• 

802.11b/g Protection: 802.11b uses CCK modulation and 802.11g uses CCK–compatible 
OFDM modulation. Enable this to prevent the data collision in the concurrent 802.11b/g 
network. Auto (auto-detect) selection is recommended. 

• 

Tx Rate: The selected link rate. 

• 

 

4.6.2 Checkbox Section 

Tx BURST: Check to enable the card to transmit more data in a frame interval. 

• 

Tx turbo rate: Enhance the data rate transmitted up to 72/100Mbps. This checkbox is 
currently disabled. 

• 

Use short slot time: Enhance the data rate with Short Slot Time mechanism. This checkbox 
is currently disabled. 

• 

 

4.6.3 Icons & Buttons Section 

 Radio On: Enable radio transmission. 

• 

 Radio Off: Disable radio transmission. 

• 

Apply: Confirm your settings. 

• 

 
 

Содержание Wireless PCI Adapter











































Отзывы: