E-Tech VPPH01 Manual
8
ppp pin:
With pppoe or modem selected in iptype drop down list, please enter the password here.
local ip:
With static ip selected in iptype drop down list, please enter IP address of IP phone here.
subnet mask:
With static ip selected in iptype drop down list, please enter subnet mask of IP phone here.
router ip:
With static ip selected in iptype drop down list, please enter router IP address of IP phone here.
dns:
With static ip selected in iptype drop down list, please enter IP address of DNS server here.
dns 2:
With static ip selected in iptype drop down list, please enter IP address of backup DNS server here.
mac:
MAC address is the physical address supplied by the Ethernet NIC. The E-Tech VPPH01 phone is shipped from
the factory with a unique algorism MAC address printed on the back of the base.
•
protocol settings
protocol:
Select an item from dropdown list to set the protocol used by the phone.
- h323: Select this item to set the phone use H323 protocol.
- Sip: Select this item to set the phone use SIP protocol.
- Mgcp: Select this item to set the phone use MGCP protocol.
- n2p: Select this item to set the phone use Net2phone private system.
- iax2: Select this item to set the phone use IAX2 private system.
- wp
:
Select this item to set the phone use WP private system
Note
With Net2phone selected here, please set other necessary parameters: check use service option, and then
fill IP address or domain name of designated server into service addr field; then set service port as 6801; fill account
and password of Net2phone card into account and pin fields.
use service:
Enable/disable service by checking/unchecking this box. Different service responses different protocol
as follows:
- With H323 protocol used, the protocol service refers to the gatekeeper searching the address. To let IP phone call
each other by E.164 number, please check this box and then fill the IP address or domain name of corresponding
gatekeeper into service addr field. Without this check box being selected, the phone can call by gateway or just by
dialing IP address of other IP phone or H323 device (such as Netmeeting) at the same network
segment.
- With MGCP protocol used, the protocol service refers to Call Agent. Please check this box according to system, and
then fill service addr field with Call Agent IP address or domain name.
- With SIP protocol used, the protocol service refers to SIP Proxy Server. Check this box according to system, and
then fill service addr field with SIP Proxy Server IP address or domain name.
- With Net2phone protocol used, the protocol service refers to designated server. Please check this box, and then fill
the designated IP address or domain name into service addr field.
Note:
Designated Net2phone Server IP addresses are: 216.53.3.52; 4.43.114.39; 4.43.114.38 or
205.228.245.8.Domain names are: call1.net2phone.com; call2.net2phone.com; skip1.net2phone.com;
skip2.net2phone.com; skip1.f8g9h0.net or skip2.f8g9h0.net.
Содержание VPPH01
Страница 1: ...Professional VoIP Phone VPPH01 User Manual...
