E-Tech HDCS04 English Manual
12
Restoring a backup:
-
Start the program and click the “Files Backup” icon or press the “Backup” button on
your HDCS04 (See 2.1 Front-Side connectors).
-
Select the backup you want to restore.
-
Click the “Restore” button on the lower right part of the screen and confirm restoring
the backup by clicking “OK”.
Configuration:
Using the “Setup” option you can change a number of settings:
Hotkey:
Assign a hot-key (a key combination) to allow you start the program.
Quick file backup double confirm:
Ask for confirmation when making a quick backup.
Load automatically on Windows Start-up:
Check this option if you want the program to start up when Windows starts up.
Compression ratio:
Select the compression ratio to be used. The higher you set it the longer the backup will take,
the smaller the file size of the backup will be.
Add files to existing backup:
The files you select to be backed-up will be appended to an existing backup.
Discard and replace existing backup:
The files you select will be backed-up to a new file.
Power off after backup:
Check this option to have the HDCS04 power off after finishing a backup.
