E-Swin E-one, Руководство пользователя

Страница: 22 / 25

USING THE ACCESSORIES
43 42
The clean spray is used for the cleaning and maintenance of:
• the optical parts of the mobile applicator head:
- external optical parts: spray on directly then wipe
with a dry cotton cloth.
- internal optical parts: never spray directly on the
internal optical parts. Spray onto a dry cotton cloth
then clean the filter (red, glass flat part) using the
dampened cloth. Polish with the dry part of the cloth.
The spray must only be used when the E>One has been
unplugged and when the optical parts have cooled down.
If you are cleaning the E>One immediately after use it must be
ensured that the applicator fan has fully stopped before
unplugging the base. This enables the optical and other parts
to cool down properly.
• the applicator touch screen: never spray
directly onto the touch screen. Spray onto a
dry cotton cloth then clean the screen using
the dampened cloth. Polish using the dry part
of the cloth.
clean
Made in France
These patches are used to protect small areas that are not to
be treated (i.e. moles).They must be placed after shaving
and before application of the gel. The designated
areas can then be treated without having to worry
about moles. The patches should be removed at
the end of the session.
patches
Made in France
These stencils can be used to mark out areas to be left untrea-
ted in order to keep hair in fun shapes in specific places (see
the templates on our website at www.e-swin.com). They are to
be applied after shaving and gel application. The gel helps hold
the stencils in place. The applicator is safe to use overlapping
the edge of the stencils so as to form a clear outline of the
shape required.
fun (option)
Made in France
www.e
-
swin.com
Pen
The gel must be stored at ambient temperature.
It is to be applied in a thick layer, gradually throughout the
session to prevent it from drying on the skin. Once the gel has
been applied to the skin and exposed to the shots it must not
be re-used on another area. The gel's optical characteristics are
subject to change after treatment. The gel is to
be removed at the end of the session either in
the shower or using a damp towel. It should also
be removed from the optical and mobile parts of
the applicator using a slightly damp cloth and the
clean
spray.
gel
Made in China
Made in Europe
The mask must be worn by all persons present at the time of
shot emission. It masks the
area that should not
be
exposed to the treatment
(eyelashes, eyebrows etc).
mask
Made in China
This plate is made from a shot-resistant material. It is used to
protect any areas from unwanted treatment (i.e. a tattoo). The
glass applicator tip (light guide) is safe to use overlapping the
stop
and the skin.
stop
Made in France
See all our products on our website at
The pen is used to circle the area to be treated before the gel
is applied.
Important: this pen only must be used to mark out the
areas to be treated and is designed to be shot-resis-
tant. Any other pen or pencil may cause skin
burns if the pulse is directed on the line
drawn on the skin.
Active components:
Menthylsothiazoline and Methylcholoroisothiazolinone (MCI/MI).
Their quantity, in a ratio of 3:1 is 0.0008%. Does not contain formal-
dehyde. Keep away from light – external use only.
Do not use on damaged, burnt or infected skin.