How do you select a mode? Simple press the SELECT button twice ( a ‘double’ press’)
and the display should change to
1
P u l s e
U s e A D J U S T t o c h
with a scrolling message. Use the adjust knob to cycle
through the available modes and then press the select
button to choose the mode. For more details on the
available modes see page 13.
Now for the fun part.
Turn the unit off and connect a suitable electrode via
the output connectors. (Page 12) Connect an electrode
to a suitable section of the body.
(DO NOT CONNECT THE 2B UNIT OR ANY ELECTRICAL DEVICE TO ANY LOCATION
ABOVE THE WAIST (ACROSS THE ARMS COUNTS AS ABOVE THE WAIST!), BUT ESPECIALLY
DO NOT CONNECT ACROSS THE HEART, CHEST, NECK OR HEAD. DO NOT USE IF FITTED
WITH A PACEMAKER OR ARE PREGNANT. REMEMBER YOU USE THIS DEVICE AT YOUR
OWN RISK.
Turn the unit on and slowly turn the output level control up. You should start to feel a
slight tingling sensation from the electrode site.
Not powerful enough? The 2B operates in two modes LOW Power and High Power. See
page 14 for details on how to switch your 2B box to the high power level. And if you
want even more power, then connect our external power supply unit.
Experiment! Only with experience will you get the most out of your 2B. You will find that
different modes and levels will give different sensations.
Always bear in mind the safety warnings.
SAFETY WARNING
(DO NOT CONNECT THE 2B POWER UNIT OR ANY ELECTRICAL DEVICE TO ANY
LOCATION ABOVE THE WAIST (ACROSS THE ARMS COUNTS AS ABOVE THE WAIST!), BUT
ESPECIALLY DO NOT CONNECT ACROSS THE HEART, CHEST, NECK OR HEAD. DO NOT
USE IF FITTED WITH A PACEMAKER OR ARE PREGNANT. REMEMBER YOU USE THIS DEVICE
AT YOUR OWN RISK. YOU MUST READ AND UNDERSTAND THE USER MANUAL AND ALL
OTHER INSTRUCTIONS BEFORE ATTEMPTING OPERATION.
All modes will start off in a
safe way. Outputs will be set
to OFF and the adjustment
control will be set to the
middle of the adjustment
range.
7
