OPERATING INSTRUCTIONS
STEP 1 -
SNAP ELECTRODE WIRES to MASSAGE PADS
STEP 2 -
REMOVE PLASTIC FILM from PADS
STEP 3 -
PLACE PADS ON SKIN
(Refer to the Pad Placement Guide for suggestions)
STEP 4 -
CONNECT ELECTRODE WIRE to CHANNEL A
Repeat 1 - 4 for CHANNEL B
STEP 5 -
TURN the unit ON
STEP 6 -
PRESS (T) to CYCLE through THERAPIES
STEP 7 -
PRESS the CENTER BUTTON to SELECT THERAPY
STEP 8 -
PRESS - OR + to ADJUST INTENSITY
STEP 9 -
PRESS the CENTER BUTTON to toggle between
CHANNEL A, CHANNEL B, and DUAL CHANNEL CONTROL
Repeat steps 6-9 to select different therapies for
channel A and/or channel B
STEP 10 -
PRESS the (D) BUTTON to ADJUST DURATION
of the therapy
STEP 11 -
PRESS and HOLD the CENTER BUTTON for 3 SECONDS to
LOCK/UNLOCK the device
9