5
5.
Delete an Alarm: Select the alarm you want to delete. Tap button B to
change the hour until --: -- is displayed.
6.
Exit the Alarm Setting Mode: Tap button A until the current time is
shown. This occurs after Alarm 9 and indicated by “:” blinking. When the
“:” is blinking, the number next to the alarm clock indicates how many
alarms have been set.
7.
e-pill Voice will confirm with “Alarm Setup Successfully.”
Alarms – Setting the Alarm Volume
3 alarm volumes: Silent (0), Medium Volume (1), Loud Volume (2).
1.
With the current time shown, tap button C to enter the settings menu.
2.
Tap button B to switch between the volume levels: 0, 1 and 2.
3.
Tap button A to save.
4.
e-pill Voice will confirm with “Pill Dispenser Settings Updated.”
SETUP – STEP 2
Filling the Tray
1.
Remove the clear tray that is inside the dispenser. This makes filling the
tray easier. Important: Never force the tray to rotate.
2.
e-pill Voice comes with 9 different dosage templates. Place the dosage
template that is designed for the number of alarms you have set into the
tray’s template slot.
3.
With the tray’s e-pill sticker at 6 o’clock, fill the tray counter-clockwise.
The first dose goes into the compartment immediately to the right of the
tray’s e-pill sticker.
4.
Fill the compartments using the dosage template as a guide.
5.
Place the tray into the dispenser so that the compartment immediately
to the right of 6’oclock holds the next alarm’s dose. This will ensure that
the correct dose will always rotate into position at each alarm time.
Important: Never force the tray to rotate.
6.
Close the lid.
7.
Turn the dispenser over and lock the dispenser.
Important: The dispenser’s lock should only be turned a ¼ of a turn.
Overturning the key can cause the lock to break.
Congratulations
Your e-pill Voice is now 100% setup.
