OPERATING INSTRUCTIONS
e-pill Medose Vibrating 6-Alarm Medication Reminder Watch
BASIC FUNCTIONS
FEATURES
The e-pill Medose Vibrating Medication Reminder Six
Alarm Watch is an innovative device to help improve
patient compliance.
•
Up to 6 daily alarms
•
Choice of vibration or sound alarm
•
No alarm reset required
•
5 modes of operation: Normal Time, Dual Time
Zones, Alarms, Count Down Timer &
Chronograph
•
Easy to read large display with back light
HOW TO SET THE CORRECT TIME
•
Tap button C until mode prompt "TIME" is
reached.
•
Press & hold button D for 5 seconds to enter
setting mode. The seconds will start flashing
•
Tap C
•
Tap A until the correct Hour is reached. Please
note the PM indicator above the Seconds
•
Tap C
•
Tap A until the correct Minute is reached.
•
Tap C
•
Tap A until the correct Year is reached.
•
Tap C
•
Tap A until the correct Month is reached
(1=January, 2=February … 12= December)
•
Tap C
•
Tap A until the correct Day of the Month is
reached.
•
Tap C
•
Tap A until the correct Day of the Week is
reached. (TU=Tuesday, TH=Thursday)
•
Tap C
•
Tap A if you want military time (24 hour clock).
•
Tap D to leave setting mode.
Congratulations - you have now set your MeDose
watch to the correct time.
BACK LIGHT
Tap button D for Back Light (3 seconds illumination).
CHANGE DISPLAY
Press button C to change displays. The sequence is
as follows:
->TIME ->ALARM ->TMER ->CHRONOMETER ->
VIBRATION or BEEP SOUND ALARM
Press & hold button A for 5 seconds to toggle between
Vibration or Beep Sound alarm. A small “W” will appear
in the display (top left) when the MeDose is in
Vibration mode.
The alarm lasts for 20 seconds. Tap any button to stop
the alarm. The MeDose will give a brief alarm on the
hour if the chime function is on.
HOW TO SET DAILY ALARMS
•
Tap button C until mode prompt “ALARM”
(“AL-# ” or “Chime”) is reached.
•
Tap button B to go to the alarm you want to set
(Alarm-1 is AL-1, Alarm-2 is AL-2, Alarm-3 is
AL-3, Alarm-4 is AL-4, Alarm-5 is AL-5, Alarm-6
is AL-6 and CHIME is the 7
th
alarm).
For each DAILY alarm do the following:
•
Press & hold button D for 5 seconds to enter
setting mode. The hours will start flashing.
•
Tap A until the correct Hour is reached. Please
note the PM indicator above the Seconds.
•
Tap C
•
Tap A until the correct Minute is reached.
•
Tap D to leave setting mode.
Make sure ON is displayed next to the minutes. If
“ON” is not showing you can toggle to ON by
tapping A.
Proceed to your next alarm by tapping B.
e-pill
MeDose