User guide
AEM10941
User guide
AEM10941
User guide
AEM10941
Evaluation board for AEM10941
Description
The AEM10941 evaluation board is a printed circuit board
(PCB) featuring all the needed components to operate the
AEM10941 integrated circuit (IC). Please refer to the datasheet
for all the useful details about the AEM10941 (Document
DS AEM10941).
The AEM10941 evaluation board allows users to test the e-peas
IC and analyze its performances in a laboratory-like setting.
It allows easy connections to the energy harvester, the storage
element and the low-voltage and high-voltage loads. It also
provides all the configuration access to set the device in any
one of the modes described in the datasheet. The control and
status signals are available on standard pin headers, allowing
users to wire for any usage scenario and evaluate the relevant
performance.
The AEM10941 evaluation board is a plug and play, intuitive
and efficient tool for making the appropriate decisions (com-
ponent selection, operating modes) for the design of a highly
efficient solar energy powered subsystem in your target appli-
cation.
Applications
•
PV cell harvesting
•
Home automation
•
Industrial monitoring
•
E-health monitoring
•
Geolocation
•
Wireless sensor nodes
Appearance
Features
Four two-way screw terminals
- Source of energy (PV cell)
- Low-voltage load
- High-voltage load
- Primary energy storage element
One three-way screw terminal
- Energy storage element (battery or (super)capacitor)
One zero insertion force (ZIF) connector
- Alternative connection for the source
One 2-pin ”Shrouded Header”
- Alternative connection for the storage element
Eight 3-pin headers
- Maximum power point (MPP) configuration
- Low drop-out regulators (LDOs) enabling
- Energy storage elements and LDOs configuration
- Dual-cell supercapacitor configuration
Three 2-pin headers
- Primary battery configuration
- Cold-start configuration
Provision for ten resistors
- Custom mode configuration
- Cold start configuration
- Primary battery configuration
Three 1-pin headers
- Access to status pins
Device information
Part number
Dimensions
2AAEM10941C0022
76 mm x 50 mm
1
UG AEM10941 REV1.0
Copyright c
2018 e-peas SA
1
UG AEM10941 REV1.0
Copyright c
2018 e-peas SA
1
UG AEM10941 REV1.0
Copyright c
2018 e-peas SA
