e-nova ZNH-E-2021 Скачать руководство пользователя страница 4

Version 1.0

2

.

★★

Safety Instructions

★★

Read the instruction manual thoroughly and follow the safety instructions in particular very carefully
before the use of bicycles.

Always obey traffic regulations.

Do not give up the wheel to a person who is not familiar with the bike and operating instructions before
riding.

Wear a bicycle helmet whenever riding a bicycle.

Check the bicycle brakes before each use, and keep in mind that the braking distance is extended wet/
icy conditions.

Check your bicycle's tire pressure at regular intervals. Having the correct tire inflation pressure is 3.5bar.
Incorrect tire pressure can lead to tire damage and shorten operating distance significantly.

2.1 Electrical Safety

★★

CAUTION! 

★★

Keep electrical appliances out of the reach of children.

To avoid injury, use only the provided bike included charger to charge the battery.
Using the wrong charger battery may lead to an explosion and cause personal injury and property
damage.

Use only batteries approved for this product and accessories. Use of supplies from third parties with this
wheel can result in fire, electrical shock, or personal injury.

Do not expose the wheel electrical equipment to moisture, water or other liquids. However, if electrical
appliances are exposed to water, disconnect the charger from the wall outlet immediately and deliver
damaged parts service center for resellers for review.

Do not expose the battery to fire and keep it away from it away. Risk of explosion!

Unplug the charger from the wall outlet when nominees.

Remove the charger by pulling the plug, not the cord.

Do not use the charger if the plug or cord is damaged, or if the charger is otherwise defective.

The charger and the battery do not contain any user-serviceable parts. Do not attempt to disassemble or
repair the charger or battery on your own.

Do not short-circuit the battery caused by metal objects.

Clean the electrical product only with a dry cloth or rag.

Avoid using an extension cord with the charger. Use an extension cord only if you are absolutely sure of
the compatibility of the extension cord with the charger.

Before you plug in the charger, check that the power supply voltage is consistent with the marked voltage
charger.

It is recommended that the battery is charged 10C-30'C temperature so that it remains a long age.

If you charge the battery immediately after use, allow the battery to cool down for 30 minutes before
charging.

To prevent fire disaster from overcharging the battery, disconnect the charger after the battery is fully
charged.

In order to ensure the battery life, the battery must be recharged every two months.

Please keep the battery in a dry, cool and ventilated place. Avoid high temperature, super cold, and high
humidity the environment.

IMPORTANT!

Please read this manual carefully and strictly following it during the use of this product.

Otherwise, customers will take the corresponding risks of incorrect use.

Before first use, be sure to

carefully that the bicycle is assembled correctly. You can do this by submitting your bike in to the
nearest bicycle circulation, or if you are an experienced bicycle enthusiast, you can compile and
check the wheel itself. Make sure in particular that the pedals, saddle, brakes, handlebars, and any
part of a self-installing is properly installed.
NOTE

Never ride your bicycle while under the influence of alcohol. Drinking alcohol impair the ability

to react significantly limits your ability to use the wheel safely. Even a small amount of alcohol, limit
your ability to operate safely in traffic.
If you want to change the bike battery, take the battery for recycling either the retailer or to a local
recycling disposal company responsible.

4

Содержание ZNH-E-2021














Отзывы: