22
Proteus operation manual
SEND MIDI DATA
This function will send MIDI System Exclusive data to the MIDI Out port
of the Proteus. The MIDI data can either be sent to a computer/sequencer
or to another Proteus. Using the cursor key and the data entry control,
select the type of MIDI data you wish to transmit. The choices are:
Master Settings:
Transmits all parameters in the Master menu except
tuning table, program/preset map and viewing angle.
Program/ Preset Map:
Transmits only the program/preset map.
Tuning Table:
Transmits only the user tuning table.
Factory Presets:
Transmits all the factory presets.
User Presets:
Transmits all the user presets.
Any Individual Preset:
Transmits only the selected preset.
The Enter LED will be flashing. Press the Enter button to confirm the
operation. To receive MIDI data, simply send the MIDI data into Proteus
from another Proteus or your sequencer.
SEND MIDI DATA
000 Stereo Piano
USER KEY TUNING
In addition to standard twelve tone equal temperament, the Proteus
contains four additional preset tuning tables (Just C, Vallotti, 19 tone, and
Gamelan) and one user definable tuning. User Key Tuning allows you to
alter the parameters of the user definable tuning stored in memory. The
initial frequency of every key can be individually tuned, facilitating the
creation of microtonal scales. Using the cursor key and the data entry
control, select the key name, the MIDI key number and the fine tuning.
The key name is variable from C-2 to G8. MIDI key number is variable
from 0 to 127. The fine tuning is variable from 00 to 63 in increments of
1/64 of a semitone (approx. 1.56 cents). For each preset, the specific
tuning table is selected in the Edit menu.
USER KEY TUNING
Key:C1 036.00
MASTER MENU
Send Preset Data
Application:
The user key tuning
can be used to tune
individual percussion
instruments.
To Record MIDI Data
into a Sequencer:
1. Setup sequencer to
receive system exclusive
data.
2. Place sequencer into
record mode, then Send
Preset Data.
To Receive MIDI Data
from a Sequencer:
1. Simply play back the
sequence into Proteus.
■
The Preset, Volume,
and Pan information for
all 16 channels is in-
cluded when the Master
settings are transmitted
or received.
▼
Warning: When
transferring SysEx data
from one Proteus to an-
other, the ID numbers of
both units must match.
Содержание Proteus
