Chapter 3: Master Menu
27
MASTER MENU
••• A few of the standard-
ized MIDI Controller
numbers are listed below.
1 - Modulation Wheel
2 - Breath Controller
3 - Aftertouch
4 - Foot Pedal
5 - Portamento Time
6 - Data Entry
7 - Volume
8 - Balance
9 - Undefined
10 - Pan
11 - Expression
• Preset Change
This function lets the Planet Phatt utilize or ignore incoming MIDI
preset change or Bank Select commands for each channel. Note that a
MIDI program change command can only select presets in bank 0. The
presets in banks 1-4 can be selected manually, by changing the MIDI
bank, by using a MIDI bank select command, or by using the mapping
function “MIDI PROGRAM
➙
PRESET”.
PRESET CHANGE
channel 01: On
• MIDI Controller Assign
Planet Phatt allows you to assign up to four realtime control sources
from your MIDI controller. These control sources could be modulation
wheels, data sliders or whatever.
In this screen, you set up which
controllers will be received by Planet Phatt.
What effect the control-
ler will have is programmed separately for each preset. Planet Phatt
MIDI controllers are each assigned a letter, A-D. Each controller letter
can be assigned to a MIDI realtime controller from 00-31.
Note:
If
controller numbers 7 or 10 are selected, they will override the
standard MIDI volume and pan control routings.
CONTROLLER# ABCD
01 02 03 04
• X Factor Control
This function allows any MIDI controller number from 0-31, mono
pressure, or the pitch wheel to change the X Factor (transpose) of
Beats mode. Two controllers can be assigned to move the X Factor
both up and down from its initial position. With a wheel assigned to
the up control, moving the wheel up adds a positive offset to the X
Factor setting. Moving the wheel back down returns the X Factor to its
original setting. The maximum controller offset is
±
36, which is added
to the initial setting. The pitch wheel (pwh) can be assigned to both
up and down settings to allow bidirectional control. When “Off” is
selected, external control of X Factor is disabled. This controller is
only recognized on MIDI channel 16, unless Planet Phatt is in Omni
mode, in which case all channels are accepted.
X FACTOR CONTROL
up:14 down:15
••• The X Factor, Tempo
Control Retrigger and Scratch
settings are sent and received
with the Master Settings. See
Send MIDI Data
.
••• For more information on
controller assignments, see
MIDI Realtime Controls in the
Programming Basics section.
••• When X Factor Control is
being used, the last setting of
the MIDI controller remains
in effect when a new Beat is
selected.
Содержание Planet Phatt
