manualshive.com logo in svg

E-Mu 1212M, Руководство пользователя

Поделиться
Скачать
E-Mu 1212M Скачать руководство пользователя страница 115

6 - Using High Sample Rates

Overview

E-MU 1820M/1820/1212M PCI Digital Audio System

115

Example: Selecting a 176/192k Session 

The possible input configurations are selected by choosing a session template 
containing the desired I/O from the 

New Session

 window. Once you have selected one 

of the three session types, you will not be able to change to another type without 
starting a new session.

1.

Select 

New Session

 from the PatchMix DSP toolbar.

2.

Choose the 

176k/192k

 

tab.

3.

Select the Template

 that meets your requirements and click 

OK.

WDM Recording and Playback Behavior

WDM recording and playback is supported at all PatchMix sample rates. The behavior of 
the driver with respect to PatchMix sample rate is described below. 

When PatchMix and the WDM audio content (.WAV file format, playback and record 
settings in WaveLab. etc.) are both running at the same sample rate, and when a Wave 
strip or send is present in the PatchMix mixer configuration, WDM audio will be played 
or recorded “bit accurate” without sample rate conversion or bit truncation.

When running PatchMix at 44kHz/48kHz, if there is a mismatch between the WDM 
playback audio content and the PatchMix sample rate, sample rate conversion is 
performed, so that WDM audio will always be heard or recorded. Also, such non-native-
sample-rate audio is truncated to 16-bits.

When running PatchMix at 88.2kHz, 96kHz, 176.4kHz or 192kHz, WDM record or 
playback audio content must be running at the same sample rate as PatchMix. If the 
sample rates are mismatched, NO AUDIO will be produced or recorded. In other words, 
the WDM driver does not perform sample rate conversion of any kind when PatchMix is 
running at 88.2kHz, 96kHz, 176.4kHz or 192kHz.

Содержание 1212M

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды