Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk
9
9
Attaching / Detaching the stand and wall mounting
ATTACHING/DETACHING THE STAND
Attaching the Stand
1) Insert the TV into the stand at 45 degrees
2) Twist the TV into the CLOSE
position
until
it
clicks
into
place
Detaching the Stand
1) To remove the base, press close button and rotate 45 degrees.
2) Remove the 4 screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
fi g 1
fi g 2
For optimum viewing,
if wall mounting the TV
higher than eye level,
the TV should be tilted
downwards so that the
TV’s screen is ‘face on’.
See fi g 1 and 2
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Wall mounting the TV
This television requires a VESA 100 wall mount, or equivalent.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
User Guide - emotion - U185-194G-GB-TCUP-UK, U23-194G-GB-TCUP-UK.indd Sec1:9
User Guide - emotion - U185-194G-GB-TCUP-UK, U23-194G-GB-TCUP-UK.indd Sec1:9
06-Jun-11 4:11:11 PM
06-Jun-11 4:11:11 PM
