13
E-MORE TV LIFT 650 / 1000
Press
S
button to enter. It will display
, press UP or DOWN. It will display
and
.
: Sets the lowest position height display.
:Sets a new minimum desk height
:Sets a new maximum desk height
If
,
or
is already set, please drive the table-frame to the previously set height to change the value.
Press UP or DOWN. It will display
, press
S
button to enter. It will display the current lowest height. Press UP or DOWN
to set the lowest height display, press
S
to confirm .
Press UP or DOWN ,It will display
. Press
S
button to enter. It will display the current lowest height. Press UP or DOWN
to set a lowest height position, press
S
to confirm .
Press UP or DOWN ,It will display
. Press
S
button to enter. It will display the current highest height. Press UP or DOWN
to set a new highest height position, press
S
to confirm .
8.Factory use setting (
)
Factory use, please ignore this programming.
9. Factory use setting (
)
Factory use, please ignore this programming.
10. Setting bounce height (
)
Press
S
button and hold for 3 seconds, handset display
. Release
S
button, press
S
button again to enter, it displays
.
Press UP or Down to display
.
Press
S
button to enter. It will show the current bounce height.
Press UP or DOWN to get the bounce height. Press
S
to confirm, wait 2 seconds, it will display the current height.
11. Restore Factory Defaults (
)
Press
S
button and hold for 3 seconds, handset display
. Release
S
button, press
S
button again to enter, it displays
.
Press UP or DOWN to display
.
Press
S
to enter. It will display
and flash.
Press
S
to confirm, wait 2 seconds, it will display
. Perform a reset as mentioned under troubleshooting.
12.Fatigue test mode (
)
Factory use, please ignore this programming.
