10
ENGLISH
HANDSET / REMOTE CONTROL
1. Up / Down Keys
To adjust the height of the TV mount, keep pressing the "UP"
or "DOWN" key until the mount reaches the desired position.
2. Display Screen
Display the height value of the TV mount.
3. Memory Key (1 / 2 / 3)
After setting memory keys: Keep pressing the memory button, the desk will move to the saved position.
How to set a memory key: Please select the desired position. Then press the S-Key. Then press the desired Button from 1 to 3
to assign the current height to a number on the control panel. Whenever a programmed memory key is pressed, Keep press-
ing the memory button, the desk will move to the saved position
4. Set Key
The set key can be used to save the height of the mount.
5. Anti-collision function
When the mount encounters reverse resistance while moving, the mount will stop and move slightly in the opposite direction.
6. Reset
When the system is experiencing a problem or the control panel displays "RES", the system must be reset. Press and hold the
"DOWN" button throughout the process. After 5 seconds, the mount will lower slightly until it reaches its lowest height, then
rises slightly and the display changes back to the numeric height setting. After the mount stops, the reset process is success-
fully completed.
7. Keypad Lock
To lock: Press and hold "UP" and "DOWN" buttons for 5 seconds until "LOC" sign appears on the display, indicating that the
system is locked.
To unlock: Press the "UP" and "DOWN" buttons for 5 seconds at the same time until the
"LOC" sign disappears and the height of the mount is displayed, indicating that the system
is ready to be adjusted again.
8. One- or constant-touch mode
Press button “S” + button “UP “and hold them for 2 seconds. The handset will display O.
This means the buttons have switched to one-touch mode.
Press button “S” + button “UP “and hold them for 2 seconds. The handset will display C.
This means the buttons have switched to constant-touch mode.
2. TV mount:
Anti-Collision
Built-in load limit switch
Maximum load:
60 kg (TV Lift 650)
80 kg (TV Lift 1000)
Speed:
25 mm/s
Minimum Height:
620 mm (TV Lift 650)
860 mm (TV Lift 1000)
Travel-Distance:
650 mm (TV Lift 650)
1000 mm (TV Lift 1000)
1. Electric Components:
Input Voltage:
110-240V AC
Output Voltage:
24V DC
Duty cycle:
25% max, 5 min on 18 min off
Automatic
power
off,
low
energy
consumption
TECHNICAL SPECIFICATIONS
5 years
warranty
USB-Slot (for charging)
USB-Slot on the side
with charging function
