E-LOK 7 Series, Руководство пользователя

Страница: 2 / 40

1. Crop out done as per template.
2. Arrow on spindle hub points to lever/hinges.
3. If changing handing, ensure plastic washers re-ins
fixing screw hand tightened.
4. Check rubber gasket installed correctly, with
lugs pressed in tight, so proper seal around
backplate edge.
5. Ensure split pin is installed, securing spindle
to spindle hub.
6. Ensure screw casing bolts & through bolts tightened.
7. Ensure power cable wire installed correctly & not bent or
crimped in door.
8. Check batteries installed in correct position.
Professionally Installed by:
Pin code: Date:
7 - S e r i e s
Summary Check List:
For further details see pages 8-12
Top
_________________________
____________ ____/____/____