3
High efficient optical lens systerm.
3-40degree wide zoom range.
Nice beam effect & Nice wash effect.
Color: RGBW mixture
Dimmer: 0-100% linear dimming system
Display:
LCD Menu Display
Protection: Auto temperature control system with big cooling fan.
Quiet, smooth and fast PAN/TILT movement
Low noise and efficient FAN cooling system
Built-in pre-programs with macro effects.
POWERCON power connector
45
℃
max ambient temperature
IP20 protection rating
3&5-Pin XLR DMX input/output
LED rainbow effect.
Perfectly suitable for stage, theatre, TV studio, rental, DISCO and more
Maintenance and Cleaning
The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2.
There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension,
trussing). 3. Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances. 4.
The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety
problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are
in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.There are no serviceable parts inside the device. Please refer to the instructions under “Installation
instructions”.Should you need any spare parts, please order genuine parts from your local dealer.
Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it
is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately.
The arising condensation could damage the device. Leave the device switched off until it has reached room