E-Lins H820QO Series, Руководство пользователя

Страница: 10 / 99

H820QO User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com www.e-lins.com
2.8 LED and Check Network Status
Please connect the antenna after you successfully connect to the cable. And then insert the
valid SIM/UIM card and provide the power to the H820QO series via the cable. After provide the
power to H820QO, if the SYS LED starts to blink in a few seconds, that means the system
start-up is normal; if the CELL LED works, that means the network is online; if the VPN light
works, that means VPN tunnel has been set up. Please refer to the below table for the situation
of the indication lights.
LED Indication Light Description
SYS On for 25 seconds On for 25 seconds after power supply
blink System set-up normally
Off or still on after 25
seconds System set-up failure
WiFi On WiFi is Enabled
Off WiFi is Disabled
NET1
On SIM1 Online to the Internet/Private Networks
Off SIM1 Not online
NET2 On SIM2 Online to the Internet/Private Networks
Off SIM2 Not online
SIG1 blink ( 2 seconds for
on, and 2 seconds
for off) SIM1 Signal bar is 1
blink ( 1 seconds for
on, and 1 seconds
for off) SIM1 Signal bar is 2