E481 Series Router User Manual
E
‐
Lins
Technology
Co.,Limited
Add:
Bld22.,
Longxi
Garden,
Nonglin
RD.,
Futian
District,
Shenzhen,
518000,
China
Tel:
+86
‐
755
‐
83700465
E
‐
mail:
www.szelins.com
Chapter4
4 Login Web
G285/E481/C385 Cellular Router contain WEB SERVER, CONSOLE, TELNET and so on configure mode. It
suitable different users for configure operation in local or remote. But web server is best easy to used, so we
advise you to use this configure mode.
4.1 Connection configuration
Step 1
:
Ensure that the computer is on the same network address range as the Router and make sure the
computer’s default gateway and DNS server
Consult your operating software user manual to determine how to change the IP address on the Ethernet port
of the computer and the default gateway address. In the example below the IP address of the PC has been set
to 192.168.0.2~192.168.0.254 and the default gateway is the default address of the cellular Router
(
192.168.0.1
)
For Windows XP the sequence is:
START >>Control Panel >> Network Connections >>Right-Click on Local Area Connection >> Properties >>
Internet Protocol
Change the computer’s IP address, default gateway and DNS server and then click OK.
It may take a minute or two for the computer to be allocated the new IP address. In some cases, a reboot may
be required
Step 2
:
To test that there is connectivity between the computer and the Axon, you can ping the Axon using
the ping command at the command prompt. To get to the command prompt in Windows XP, use:
