3.3.6
① ①
Use the screwdriver to loose the screws
of the rear panel and then remove the front
cover.
② ②
Put the HDD to the HDD bracket in
the chassis and then line up the four
screws to the four holes in the HDD.
Use the screwdriver to fix the screws
firmly to secure HDD on the HDD
bracket
③
Connect to the HDD data cable to the main board
and the HDD port respectively. Loosen the power cable
of the chassis and connect another end of the power
cable to the HDD port.
④
After connect the cable, put the front cover
back to the device and then fix screws of the rear
panel.
3.3 HDD Installation
Important
：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only.
For the first time install, please be aware that whether the HDDs have been installed.
You can refer to the Appendix for HDD space information and recommended HDD brand. Please use
HDD of 7200rpm or higher.
Usually we do not recommend the PC HDD.
Please follow the instructions below to install hard disk.
Содержание ELI-SIP2- NVR32
