Operation Manual ELI-EPTZ-27DN eLineTechnology.com
11
2.6.3 Others
2.7 Function Programming
2.7.1 Preset
1.Number
[1].Move the joystick left/right or press OPEN to enter the number editing programming.
PS: Program the number of preset position.
[2].Move the joystick left/right to select the number editing (numeral line 0~9),press
OPEN to confirm the selection. Press CLOSE to exit when your selection done.
OTHERS
1 SHARPNESS 5
2 BACK LIGHT OFF
3 WB MODE AUTO
4 R GAIN AUTO
5 B GAIN AUTO
6 VERTICAL MIRROR OFF
7 HORIZONTAL MIRROR OFF
8 IR SW MODE AUTO
9 STABILIZATION OFF
10 FUNCTION OSD ON
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
Preset option
1. Move the joystick left/right or press
OPEN to enter Function Programming
options.
2. Move the joystick up/down to move the
cursor to select the preset options.
3. Move the joystick Left/Right or press
OPEN to enter preset options.
1. Move the joystick up/down to move the
cursor to select the options.
2. Move the joystick Left/Right to set up
the options.