E-line ELI-ECOM-16, Руководство пользователя

Страница: 88 / 198

156
Figure 4-87
4.10.3.2 Alarm
Before operation, please make sure you have properly connected alarm devices such as buzzer.
In the main menu, from Setting->Event->Alarm, you can see alarm setup interface.
For analog channel, the interface is shown as in Figure 4-88 and Figure 4-89 .
For digital channel, there are four alarm types. See Figure 4-88 to Figure 4-91.

Local alarm: The alarm signal system detects from the alarm input port.

Network alarm: It is the alarm signal from the network.

IPC external alarm: It is the on-off alarm signal from the front-end device and can activate the local
HDVR.

IPC offline alarm: Once you select this item, system can generate an alarm when the front-end IPC
disconnects with the local HDVR. The alarm can activate record, PTZ, snap and etc. The alarm can
last until the IPC and the HDVR connection resumes.
Important

If it is your first time to boot up the device, the disconnection status of the front-end
network camera will not be regarded as offline. After one successfully connection, all
the disconnection events will be regarded as IPC offline event.

When IPC offline alarm occurs, the record and snapshot function of digital channel is
null.

Alarm in: Here is for you to select channel number.

Type: normal open or normal close.

PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to preset, tour&
pattern when there is an alarm. Click “select” button, you can see an interface is shown as in Figure
4-92.

Period: Click set button, you can see an interface is shown as in Figure 4-93. There are two ways
for you to set periods. There are max 6 periods in one day. There are four record types: regular,