E-line CJ-HDR104, Руководство пользователя

Страница: 124 / 164

116
Parameter Function
SMTP Server Input server address and then enable this function.
Port Default value is 25. You can modify it if necessary.
Anonymous
For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name,
password and the sender information.
User Name The user name of the sender email account.
Password The password of sender email account.
Sender Sender email address.
Encrypt Type
(Encryption mode)
You can select SSL, TLS or none.
Subject Input email subject here.
Attachment
System can send out the email of the snapshot picture once
you select the checkbox here.
Receiver
Input receiver email address here. Max three addresses.
It supports SSL, TLS email box.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormality event activates the email, system sends out
the email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormality events, which may result in
heavy load for the email server.
Update period
(interval)
This function allows the system to send out the test email to
check the connection is OK or not.
Please select the checkbox to enable this function and then
set the corresponding interval. The value ranges from 30
minutes to 1440 minutes.
System can send out the email regularly as you set here.
Health enable Please select the checkbox here to enable this function.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save
the email setup information.
5.8.2.8 FTP
The FTP interface is shown as in Figure 5-29.
It is to set FTP IP, port and etc for remote storage.
Please refer to chapter 4.10.2.8 for detailed information.