22
C
C
C
h
h
h
a
a
a
p
p
p
t
t
t
e
e
e
r
r
r
4
4
4
M
M
M
e
e
e
n
n
n
u
u
u
S
S
S
e
e
e
t
t
t
u
u
u
p
p
p
4.4.7
Privacy Mask
Go to the Main Menu
Dome Function
Privacy Mask menu as below:
【
Mask NO.
】：
Set the current mask area. 8 mask areas can be set at most.
【
Mask Color
】：
Select the color to mask.
【
Mask Display
】：
If “ON” is selected, the mask area will be displayed on the live interface.
【
Create Mask
】：
Go to the “Create Mask” sub-menu and then set the mask area and position
by moving the direction buttons on the live interface. Click “Iris-” button to switch between
the size and position of the mask area size. After that, save this mask area.
【
Delete Current Mask
】：
Select this menu to delete the current mask area.
【
Delete All Mask
】：
Select this menu to delete all mask areas.
4.4.8
Home Position
Go to System Setup
Home Position menu as shown below:
The setting steps:
①
Enable the home position function and select the preset which should be set in advance.
②
Then select delay time (range from 007s to 180s) and exit the menu.
When the stand-by time of the dome camera exceeds the delay time, the camera will
automatically execute the command to monitor the selected preset.
Note
: If the dome is on the menu state on an alarm, any command is negative.
