e-Line Technology ELI-IP5-B5-49MR Скачать руководство пользователя страница 12

10 

2.3

 

Bidirectional talk 

2.3.1  Device-end to PC-end 
Device Connection  

Please connect the speaker or the MIC to the audio input port of the device. Then connect the 

earphone to the audio output port of the PC. 

Login the Web and then click the Talk button to enable the bidirectional talk function.  

You can see the button becomes orange after you enabled the bidirectional talk function.  

Click Talk button again to stop the bidirectional talk function.  

Listening Operation 

At the device end, speak via the speaker or MIC, and then you can get the audio from the earphone or 

sound box at the pc-end. 

2.3.2  PC-end to the device-end 
Device Connection  

Connect the speaker or the MIC to the audio input port of the PC and then connect the earphone to 

the audio output port of the device. 

Login the Web and then click the Talk button to enable the bidirectional talk function.  

You can see the button becomes orange after you enabled the audio talk function.  

Click Talk button again to stop the bidirectional talk function.   

Please note the on-site listening operation is null during the bidirectional talk process. 

Listening Operation 

At the PC-end, speak via the speaker or MIC, and then you can get the audio from the earphone or 

sound box at the device-end.  

2.4

 

Alarm Setup  

The alarm interface is shown as in Figure 2-4. Please follow the steps listed below for local alarm input 

and output connection. 

1) Connect the alarm input device to the alarm input port (No.3 pin or No.4 pin) of the I/O cable.

2) Connect the alarm output device to the alarm output port (No.2 pin) and alarm output public port

(No.1 pin). The alarm output port supports NO (normal open) alarm device only. 

3) Open the Web, go to the Figure 2-4. Please set the alarm input 01 port for the first channel of the

I/O cable (No.3 pin). The alarm input 02 is for the 2

nd

 channel of I/O cable (No.4 pin). Then you can 

select the corresponding type (NO/NC.) 

4) Set the WEB alarm output. The alarm output 01 is for the alarm output port of the device. It is the

No.2 pin of the I/O cable. 

Содержание ELI-IP5-B5-49MR

























Отзывы: