Step 3
Adjust the lens to get a clear view of the area you want to monitor.
Step 4
Line up the decoration ring to the neck of the camera body and tighten in place.
Push and then turn decoration ring clockwise. The installation is completed
after you secure the decoration ring. You need to use the proper tool to open up
the side port of the U-cable channel of the decoration ring if you want to draw
out the cable from the side port of the cable channel when you are installing
the device cable. Then you can draw out the cable from the cable channel of the
pedestal. Finally you can install the decoration ring to complete the installation.
Cross-head Screwdriver
Adjustment Screw
