9
LCD
ONYX Sports Class Commuter comes with the
multifunctional LCD power assist display. The display is
mounted on the left side of the handlebar and has three
main buttons
(Power, -, +)
, and a monitor.
ON/OFF
By pressing the Power button for a couple of seconds, the display turns on and activates the power supply. To turn the
display off and deactivate power supply to the bike, long press the Power button again. When the bike is not in operation,
and no buttons are pressed for 10 minutes, the display will automatically turn off. When the e-bike system is switched off,
the leakage current is less than 1 μA.
DISPLAY CONTENT
Pedal Assist System (PAS) – Level selection
ONYX comes with 5 levels of pedal assistance. To change the PAS level, click
(+)
or
(-)
buttons to increase or decrease the levels. To avoid accidental use of the
PAS or throttle, make sure to keep the LCD turned off at all times when the bike is
not in use.
Walk Power Assist
Riders can use up to 6 km/h power assist function when pushing the bike. Hold
(-)
button to activate the Walk Power Assist function.
P
letter will appear on the screen
and the bike will start moving at the speed of no more than 6 km/h. Release
(-)
button to exit Walk Power Assist function.
Speed
After the e-bike system is switched on, the display shows current speed by default. To change the indicating information,
press
Power
to show in turn: Current Speed (Km/h) → Trip Distance (Km) →ODO (Km) →
Trip Time (Hour) →
Average Speed (Km/h) → Max Speed (Km/h). Each state will display for 2 seconds and then
automatically return to
current speed interface. If the display is set to miles, the data will be presented respectively.
Содержание ONYX
Страница 4: ...4 STRUCTURE OF YOUR E BIKE...
Страница 5: ...5 SIZING...