MOUTING THE CAMCORDER VIA ADAPTER
4.Mounting
a Large Camera with the PS-C
VCT-14 Adapter
4.1
Attach the quick release plate to the bottom of the VCT-14 mounting
adapter (part no. PS-C) using the ¼”-20 or 3/8”-16 screws included with
the head. Take care not to over-tighten the screws when mounting the
plate.
4.2
Slide the quick release plate onto the tripod head. The plate release
button will click when it is in place.
4.3
Make sure the head’s pan and tilt axis are locked, and attach the
camera’s VCT-14 wedge to the PS-C adapter. It will click when it is
locked in place. Loosen the quick release plate lock and adjust the
position of the camera to find the desired center of balance.
Q
5.2
Make sure the head’s pan and tilt axis are locked, then slide the
quick release plate onto the head, moving from the rear to the front. The
plate release button C will click when the plate is in place. Slide the plate
along the track until you find the center of balance, then lock the plate in
place with the locking knob E.
MOUNTING THE CAMERA
9
10
5.Mou
n
ting the
C
amera
to the Quick Release Plate
5.1
Attach the quick release plate to the bottom of the camera using the
included ¼”-20 or 3/8”-16 screws. Take care not to over-tighten the
screw when mounting the camera.
