E-Glide ST, Руководство по эксплуатации

Страница: 5 / 36

2
About the Battery
Your S/T lithium battery is made from Panasonic 18650 lithium cells, the same type
of cells found in Tesla EV’s. The battery is removable and can be charged on or
off the bicycle. The battery is sealed and maintenance free, you must never open
the battery as this will void the warranty. Each battery has a specific serial number
and barcode which can be found on the underside of the battery.
Charging the Battery
You will need to charge your battery prior to powering the bike for the first time.
The battery may be in hibernate state which could take over 8 hours for the initial
charge. Charge your battery as follows:
1. Lift the charging port rubber cover open at the bottom of the battery, exposing
the DC 2.5mm Power Jack (charging port). There is also a 5v USB power
source/communication port. Do not use the USB port other than to power a light or
charge a cell phone.
2. Plug the charger into a wall outlet. When ON the light will display green and
when charging, it will display red.
BATTERY MANAGMENT