E-fly 100C, Руководство по эксплуатации

Страница: 8 / 16

Alarm for low voltage of transmitter
Other function of transmitter
When the voltage of transmitter battery is under working voltage,
the red LED will flash.It is better to stop flying,or that can cause
crash of model.
Switch for servo reverse operation
During using, if servos movement can not cater to the model`s flying
need, the servos movement can be changed.CH1 is for ailoren, ch2
for elevator,ch3 for motor, and ch4 for rudder. Rev means reversed
and Nor indicates normal
Operation for chargeable plug
The chargeable plus is on the side of transmitter,and it is specially designed
for charging the transmitter battery.Please note the batteries should be well
arranged in the bay and do not over charged
Adjustment for the joystick`s length
1.turn the head of joystick anticlockwise to prolong the length and deasil
for shorten the length Please note do not prolong too much.
2.tighten the lower part of the joystick anticlockwise
逆时针调长
Deasil to short
Anticlock to prdory
Adjustment on Joystick Spring
The joystick spring can be adjusted and it is possible to change that
for ailoren, elevator and rudder.
1.Turn the srew on the transmitter back anticlockwise, and open the back
2.turn the screw of the channel to adjust the spring, deasil for
stronger and anticlockwise for weaker.
3.close the back and turn the screw deasil
screw adjustment
screw adjustment
screw adjustment
www.art-tech.com 08