8
E-flite Mini ShowTime ARF Assembly Manual
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
1
3
/
4
-inch (45mm) wheel (2)
4-40 x 3/8-inch socket head screws (2)
#4 black washers (6)
4-40 nut (2)
4-40 locknut (4)
4-40 x 1-inch socket head screw (2)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Felt-tipped pen
Phillips screwdriver (small)
Drill
Drill bit:
1
/
16
-inch
Needle-nose pliers
Nut driver:
1
/
4
-inch
Hex wrench:
3
/
32
-inch
Note
: You may consider using a larger diameter wheel,
such as 2
1
/
4
-inch (58mm) (EFLA224), if your flying site
has rough terrain. By using a larger wheel, you will not
be able to use the included wheel pants.
1. Place the landing gear onto the bottom of the fuselage.
It will angle forward when installed in the correct
direction. Attach with two 4-40 x
3
/
8
-inch socket head
screws and two #4 black washers.
