11
E-flite Mini Pulse PNP Assembly Manual
2. Slide the 1/2" (13mm) washer onto the adapter.
3. Slide the spinner backplate onot the adapter. Thread
the propeller nut onto the adapter, but do not tighten it
at this time.
4. Install the propeller assembly onto the motor shaft.
Tighten the propeller nut using a hex wrench slipped
through the hole in the propeller nut.
Note
: Make sure to check the balance of the propeller
after enlarging the hole in the propeller.
5. Snap the spinner cone onto the spinner.
