E-FLITE Brio 10 ARF, Инструкция по сборке

Страница: 51 / 56


1. Turn on the transmitter and receiver of your
Brio 10. Check the movement of the rudder
using the transmitter. When the stick is moved right, the
rudder should also move right.
Reverse the direction of the servo at the transmitter if
necessary.

2. Check the movement of the elevator with the radio
system. Moving the elevator stick down will make the
airplane elevator move up.

3. Check the movement of the ailerons with
the radio system. When you move the stick
left, the left aileron will go up and the right aileron will
go down. When you move the
stick right, the right aileron will go up and
the left aileron will go down.
These are general guidelines measured from our own flight
tests. You can experiment with higher rates to match your
preferred style of flying.
Ailerons Control Throw:
Low rate 7/16" (11mm) Up/Down
High Rate 7/8" (22mm) Up/Down
Ailerons Exponential:
Low rate 45%
High Rate 62%
Elevator Control Throw:
Low Rate 7/8" (22mm) Up/Down
High Rate 2" (50mm) Up/Down
Elevator Exponential:
Low Rate 15%
High Rate 50%
Rudder Control Throw:
Low Rate 1 1
/
2
" (38mm) Left/Right
High Rate 2 1
/
2
" (63mm) Left/Right
Rudder Exponential:
Low Rate 0%
High Rate 44%
Note : High Rates are only for pilots who
intend to do artistic and 3D flying. Aerobatic
flying requires throws that are similar to Low
Rates only
Control Throws & Exponential
51