8
E-flite Ascent PNP Assembly Manual
4. The wing will fit tight against the fuselage when
installed.
5. Use two 4-40 x 1/2-inch socket head screws and two
#4 washers to secure the wing to the fuselage. Use a
3/32-inch ball driver to tighten the screws.
Stabilizer/Elevator Installation
Required Parts
Fuselage w/wing assembly
Stabilizer
Required Tools and Adhesives
Ruler
Felt-tipped pen
Sandpaper
Painter's tape
6-minute epoxy
Mixing stick
Paper towel
Mixing cup
Rubbing alcohol
Hobby knife w/new #11 blade
1. Locate the horizontal stabilizer. Use a ruler to
determine the center of the stabilizer. Use a felt-tipped
pen to mark the center of the stabilizer.
Содержание Ascent 450 BL Park Glider PNP
Страница 26: ...26 E flite Ascent PNP Assembly Manual ...
Страница 27: ...27 E flite Ascent PNP Assembly Manual ...