15
E-flite Alpha Sport 450 ARF Assembly Manual
6. Insert the bend in the rudder pushrod wire into
the outer hole of the rudder control horn.
7. Rotate the rudder into position as shown.
8. Insert the threaded rods from the rudder through
the two forward holes in the stabilizer and into the
holes in the fuselage.
9. Slide the rudder assembly into position, making
sure it is fully seated on the fuselage as shown.
10. Slide two 3mm steel washers on the threaded
rods from the rudder assembly. The rudder
assembly is then secured using two 3mm locknuts.
Use a 5.5mm nut driver and a #2 Phillips
screwdriver to tighten the nuts. Make sure not to
over-tighten the nuts and damage the fuselage.