background image

49

50

Warranty Period

Horizon Hobby, Inc ., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in 

materials and workmanship at the date of purchase by the Purchaser .

Limited Warranty

(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable . REPAIR ORREPLACEMENT 

AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.  This warranty covers 

only those Products purchased from an  

authorized Horizon dealer . Third party transactions are not covered by this warranty . Proof of purchase is required 

for warranty claims . Further, Horizon reserves the right to change or modify this warranty without notice and 

disclaims all other warranties, express or implied . 

(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT 

 

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE 

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET 

THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE .   

(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) 

replace, any Product determined by Horizon to be defective . In the event of a defect, these are the Purchaser’s 

exclusive remedies . Horizon reserves the right to inspect any and all equipment involved in a warranty claim . Repair 

or replacement decisions are at the sole discretion of Horizon . This warranty does not cover cosmetic damage or 

damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of or to any 

part of the Product . This warranty does not cover damage due to improper installation, operation, maintenance, or 

attempted repair by anyone other than Horizon . Return of any goods by Purchaser must be approved in writing by 

Horizon before shipment .

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR 

PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM 

IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of 

Horizon exceed the individual price of the Product on which liability is asserted . As Horizon has no control over use, 

setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage 

or injury . By the act of use, setup or assembly, the user accepts all resulting liability . If you as the Purchaser or 

user are not prepared to accept the liability associated with the use of this Product, you are advised to return this 

Product immediately in new and unused condition to the place of purchase .

Law:  These Terms are governed by Illinois law (without regard to conflict of law principals) .    

Safety Precautions

This is a sophisticated hobby Product and not a toy . It must be operated with caution and common sense and 

requires some basic mechanical ability . Failure to operate this Product in a safe and responsible manner could 

result in injury or damage to the Product or other property . This Product is not intended for use by children without 

direct adult supervision . The Product manual contains instructions for safety, operation and maintenance . It is 

essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order 

to operate correctly and avoid damage or injury .

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup 

or use of the Product has been started, you must contact Horizon directly . This will enable Horizon to better answer 

your questions and service you in the event that you may need any assistance . For questions or assistance, please 

direct your email to productsupport@horizonhobby .com, or call 877 .504 .0233 toll free to speak to a service 

technician . 

Inspection or Repairs

If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA) . 

Pack the Product securely using a shipping carton . Please note that original boxes may be included, but are not 

designed to withstand the rigors of shipping without additional protection . Ship via a carrier that provides tracking 

and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is 

accepted at our facility . A Service Repair Request is available at www .horizonhobby .com on the “Support” tab . If 

you do not have internet access, please include a letter with your complete name, street address, email address 

and phone number where you can be reached during business days, your RMA number, a list of the included items, 

method of payment for any non-warranty expenses and a brief summary of the problem. Your original sales receipt 

must also be included for warranty consideration . Be sure your name, address, and RMA number are clearly written 

on the outside of the shipping carton .

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date . 

Provided warranty conditions have been met, your Product will be repaired or replaced free of charge . Repair or 

replacement decisions are at the sole discretion of Horizon Hobby .  

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed and payment will be required without 

notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost .  By submitting 

the item for repair you are agreeing to payment of the repair without notification .  Repair estimates are available 

upon request.  You must include this request with your repair.  Non-warranty repair estimates will be billed a 

minimum of ½ hour of labor. In addition you will be billed for return freight. Please advise us of your preferred 

method of payment . Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American 

Express, and Discover cards . If you choose to pay by credit card, please include your credit card number and 

expiration date . Any repair left unpaid or unclaimed after 90 days will be considered abandoned and will be 

disposed of accordingly . Please note: non-warranty repair is only available on electronics and model engines .

Product Registration

Please register your product at www .e-fliterc .com/register

Содержание Blade CX3 MD 520N RTF



























Отзывы: