7
CARE AND MAINTENANCE
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control. Should the heater reach
an unsafe temperature (212
°
F / 100
°
C), the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or
lint. If they are, use a vacuum to clean the vent areas.
5. With the POWER switch OFF, plug the power cord back into the outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
CLEANING
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before cleaning, changing the light bulbs, or moving this stove. Failure to do
so could result in
electric shock, fire, or personal injury
.
NEVER immerse in water
or
spray with water.
Doing so could result in
electric shock, fire, or personal injury.
Metal:
l
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
l
DO NOT
use brass polish or household cleaners as these will damage the metal.
Glass:
•
Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
•
NEVER
use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
•
Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
Vents:
•
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
MAINTENANCE
Risk of
electric shock
!
DO NOT OPEN the main panels!
No user-
serviceable parts inside!
Storage:
•
Store heater in a clean dry place when not in use.
Electrical and Moving Parts:
•
The fan and motors are lubricated at the factory and will not require lubrication
for the life of the stove.
•
Except for the light bulbs, all electrical parts and components are integrated into
the heater and are not serviceable by the consumer.
Light Bulb Inspection and Replacement:
The flame effect is created by two 40-Watt light bulbs with an E-12 (small) socket base.
Use only this same type of bulb as a replacement. If the flame effect does not work, the
bulbs may have come loose or been damaged during shipping.