manualshive.com logo in svg

E.F. Johnson 9800 Series, Руководство по обслуживанию, Страница: 24 / 69

Поделиться
Скачать
E.F. Johnson 9800 Series Скачать руководство пользователя страница 24

OPERATION

2-17

Revised January 2001

Part No. 001-9800-501

1. Momentarily press the Status option switch, and the 

alias of the last status sent is displayed.

2. To change the displayed status, scroll through the 

status list by rotating the Select switch. Press the 
Status option switch again to cancel this function. 

3. Press the PTT switch to send the status. When the 

message is received and acknowledged by the 
dispatcher, a signaling success tone (six beeps) 
sounds and the display returns to the normal channel 
indication. If there is no acknowledgment after 6 
seconds, a tone sounds and “NO ACK” is displayed. 
Press the Status option switch again to return to 
normal operation.

2.5.10 EMERGENCY ALARM AND CALL

Introduction

Emergency Alarms and Emergency Calls are 

separate functions that can be individually enabled or 
disabled on each SMARTNET/SmartZone system. 
The Emergency option switch is also required for 
these functions, and it is always the button to the left 
of the display when it is used. Emergency Alarms and 
Calls are transmitted on the emergency talk group 
programmed on the selected system. 

Emergency Alarms

An emergency alarm is a special data transmis-

sion that alerts a dispatcher of an emergency situation. 
Proceed as follows to activate an emergency alarm: 

1. Select a SMARTNET/SmartZone channel that has 

this feature enabled and then press the Emergency 
option switch. The radio then begins automatically 
transmitting an emergency alarm data message and 
“EMERGNCY” is indicated in the display for 3 
seconds.

2. When the emergency alarm is acknowledged, the 

emergency acknowledge tone (two beeps) sounds. 
Silent operation may also be programmed in which 
case no tone sounds and there is no indication that 
an acknowledgment occurred.

3. The radio continues to transmit this message until an 

acknowledgment is received or the programmed 

number of attempts have been made. To exit this 
mode, power must be turned off and then on again. 

Emergency Calls

An emergency call urgently requests access to a 

voice channel. To place this call, proceed as follows: 

1. Select a SMARTNET/SmartZone channel that has 

this feature enabled and press the Emergency option 
switch. The emergency mode is indicated when 
“EMERGNCY” is indicated in the display for 
3 seconds. 

2. To place the emergency call, manually press the 

PTT switch and begin speaking as with a standard 
call. All group calls which follow are then emer-
gency calls (private, telephone, and call alert calls 
are not allowed). If the channel is changed, the call 
is made on the emergency talk group programmed 
for the new channel.

3. To exit this mode, power must be turned off and then 

on again.

2.5.11 FAILSOFT OPERATION

If a failure occurs in the SMARTNET/Smart-

Zone system so that it cannot be used, the transceiver 
automatically enters the failsoft mode. When this 
mode is selected, “FAILSOFT” is indicated on the 
lower line of the display.

When in the failsoft mode, operation is in the 

conventional mode on a preprogrammed failsoft 
channel. If a transmission is attempted before a failsoft 
channel is located, a continuous tone sounds until the 
PTT switch is released. When the radio system returns 
to normal operation, this condition is automatically 
detected and normal operation resumes. 

2.5.12 SMARTNET/SMARTZONE SCANNING

Scanning on a SMARTNET/Smartzone channel 

is similar to the standard and radio wide scanning 
described starting in Section 2.3.11. Each channel can 
be programmed with a different scan list that includes 
up to 16 channels, one of which can be a priority 
channel. Up to three lists can be programmed, and 

Содержание 9800 Series






































































Отзывы:

Нет отзывов