E.F. Johnson 5100 SERIES Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 57

background image

TRANSCEIVER PROGRAMMING

3-16

September 2001

Part No. 001-5100-001

Figure 3-3 Conventional Analog Channel Screen

3.5.6 CONVENTIONAL ANALOG CHANNEL

SCREEN PARAMETERS

The following parameters are programmed in the

Conventional Analog Channel screen shown in
Figure 3-3.

Selected Channel

Zone Box - Clicking the arrow to the right of this box
displays the available zones. Click on a zone to select
it. Zones and zone aliases are set up on the Radio-
Wide General screen described in Section 3.4.2.

Channel Index Box - Displays the available channels
in the selected zone. The channel type is selected by
the Channel Type box below it.

Modify Button - Displays the Modify

Channel List screen also shown in Figure 3-3. This
screen enables the channel (makes it selectable) and
programs the following channel parameters:

Channel - Selects the channel to be edited.
Alias - Programs the identification that is displayed

when the channel is selected. Up to 10
characters can be programmed.

Transmit - Programs the transmit frequency of the

channel.

Receive - Programs the receive frequency of the

channel.

Enable This Channel - The box must be checked for

the channel to be selectable.

Rx Only - The box is checked if the channel is to be

receive only (transmitter disabled).

Copy Parameters From Channel - If another channel

is selected, the parameters from that chan-
nel are copied to the new channel.

NOTE: Channel numbers not assigned must be
programmed for conventional operation and then not
enabled in the above screen because SMARTNET/
SmartZone channels cannot be disabled.

Channel Type

Channel Type Box - Selects the specific system from
which the channel is selected. All programmed sys-
tems are displayed by number and type (conven-
tional, SMARTNET, SmartZone). In addition, with
conventional channels, either analog or Project 25 is
selected. When a different channel type is selected,
the screen for that type of channel is automatically
displayed.

System Specific Information - With conventional
systems, indicates the frequency of the selected
channel without having to select the Modify box.

«
...
53
54
55
56
57
»

Содержание 5100 SERIES


























































Отзывы:

Нет отзывов

Похожие инструкции для 5100 SERIES

Бренд: Tait Страницы: 108

HDG3000B Series

Бренд: Hantek Страницы: 22

Бренд: Sven Страницы: 6

Бренд: Eton Страницы: 11

Бренд: Memorex Страницы: 48

Бренд: Keysight Technologies Страницы: 24

Бренд: Protec Страницы: 64

Бренд: Vidao Страницы: 16

Бренд: Matrix Страницы: 69

Бренд: Blaupunkt Страницы: 97

Бренд: Palsonic Страницы: 1

Бренд: ZIPPER MASCHINEN Страницы: 93

Бренд: Feider Machines Страницы: 78

Бренд: Galaxy Страницы: 35

Бренд: Sangean Страницы: 84

Бренд: Wallenstein Страницы: 41

Бренд: Power Tech Generators Страницы: 24

Бренд: König Electronic Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды