E.F. Johnson Company 7700 Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 60

background image

GENERAL OPERATION

24

Conventional Operation

This is a non-trunked operation mode which accesses independent

radio channels (there is no automatic access to several channels as with
trunked operation). Monitoring before transmitting may not occur auto-
matically in this mode, so you may have to manually monitor the channel
before transmitting to make sure that it is not being used by anyone else
(see page 25). Selecting a conventional channel selects a transmit and
receive frequency and other parameters such as Call Guard squelch
coding.

SMARTNET/SmartZone Operation

This is a trunked operating mode that uses ID codes to select which

mobiles are being called and which calls are received. Monitoring is
performed automatically and special messages and tones indicate busy
and out-of-range conditions. Enhanced features include roaming (Smart-
Zone only), telephone, private, and emergency calls, Call Alert, and
messaging. Operating features unique to SMARTNET/SmartZone chan-
nels are described starting on page 34.

This radio supports only the SMARTNET II trunking protocol. It

does not support the SMARTNET I (also referred to as Type I) protocol.
When a SMARTNET or SmartZone channel is selected or the radio is
powered up on one of those channels, it searches for a control channel
and attempts to register on the radio system. Once a control channel is
found, the alias (name) of the selected channel is displayed. If a control
channel could not be found (because of an out of range condition or the
system ID is not correct, for example), “NO SYS” is displayed and the
radio continues to search for a control channel.

The control channel transmits and receives system information to

and from all radios registered on the system. Therefore, once a control
channel is found, it is continuously monitored for incoming call informa-
tion and is used to make call requests. The radio automatically changes to
a traffic channel to place and receive calls and then returns to the control
channel when the call is complete.

«
...
22
23
24
25
26
...
»

Содержание 7700 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для 7700 Series

Бренд: Sangean Страницы: 24

Бренд: Uniden Страницы: 36

Бренд: Radio Shack Страницы: 6

Бренд: Sangean Страницы: 27

Бренд: Yaesu Страницы: 88

Бренд: Kompernass Страницы: 20

Bearcat BC148XLT

Бренд: Uniden Страницы: 23

Бренд: MAJORITY Страницы: 24

76 XTR Street Communicator

Бренд: Cobra Страницы: 17

Бренд: Cobra Страницы: 14

Бренд: Cobra Страницы: 18

Бренд: JVCKENWOOD Страницы: 112

Бренд: Exibel Страницы: 5

Бренд: Philips Страницы: 1

Бренд: Philips Страницы: 12

Бренд: Philips Страницы: 13

Бренд: Philips Страницы: 14

Бренд: Philips Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды