E.F. Johnson Company 5300 ES Series Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 142

background image

10-2

5300 ES Series Mobile Radio Operating Manual

Secure Communication (Encryption)

10.1.2 AES (Advanced Encryption Standard)

An encryption standard called AES is replacing DES-OFB encryption on digital (P25)
channels. It uses a 128-, 192-, or 256-bit encryption key instead of the 64-bit key used with
DES. EFJohnson radios currently support only 256-bit AES keys. The type of encryption
(DES or AES) is determined by the type of encryption key that is loaded (see Section
10.2), and not by the PC Configure programming software. AES encryption, like DES
encryption, is an optional radio feature that must be purchased and then enabled at the
factory (or by a factory-created option file).

10.1.3 Encryption Available With Various Channel Types

Analog Channels - On analog conventional and SMARTNET/SmartZone channels, DES
encryption provides secure communication.

Digital Channels - On digital Project 25 and SMARTNET/Smart Zone channels, the
DES-OFB or AES-OFB protocol is used.

10.1.4 FIPS and Non-FIPS Modes

FIPS 140-2 is a Federal Information Processing Standard for encrypted radios used by the
Federal Government. This standard specifies Federal security requirements for
cryptographic modules for a wide range of applications and environments. All 5300 ES
models are FIPS certified.

10.2 Encryption Keys

An encryption key is a cryptographic variable that is required by the encryption algorithm
to encrypt and decrypt voice or data. To maintain system security, these keys must be
protected from disclosure and also periodically replaced or updated.

With the AES and DES encryption used by EFJohnson radios (see Section 10.1), the same
encryption key is used by both the encrypting (sending) and decrypting (receiving) radio.
AES encryption keys are generated from a string of 64 hexadecimal characters, and DES
keys are generated from a string of 16 hexadecimal characters. Another four hexadecimal
characters are used to specify the key ID. Multiple keys can be loaded into a radio using
OTAR or manual loading.

«
...
116
117
118
119
120
...
»

Содержание 5300 ES Series















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 5300 ES Series

Бренд: Q-Mac Страницы: 62

ProTravel PT-50

Бренд: Sangean Страницы: 56

Бренд: SAIN SONIC Страницы: 18

Бренд: Living & Co Страницы: 8

Бренд: RoadCom Страницы: 11

Бренд: GPX Страницы: 4

Бренд: Benthos Страницы: 68

Бренд: Milwaukee Страницы: 11

Бренд: ZUM Radio Страницы: 40

Бренд: Noxon Страницы: 2

Бренд: GPX Страницы: 2

Бренд: Tactec Страницы: 19

Бренд: X4-TECH Страницы: 48

Бренд: GE Страницы: 4

Бренд: Kongsberg Страницы: 64

Бренд: Sony Страницы: 2

ICF-CDK70 - Currently Not Available

Бренд: Sony Страницы: 2

ICF-CDK70 - Currently Not Available

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды