QG_EE371 // v1.1 // Modification rights reserved // 194644
E+E Elektronik Ges.m.b.H.
Langwiesen 7 • 4209 Engerwitzdorf • Austria
Tel: +43 7235 605-0 • Fax: +43 7235 605-8
[email protected] • www.epluse.com
LG Linz Fn 165761 t • VAT No. ATU44043101
Place of Jurisdiction: 4020 Linz • DVR0962759
INFORMATION
+43 7235 605 0 / [email protected]
Important note:
The manufacturer cannot be held responsible for personal injuries or damage to property as a result
of incorrect handling, installation, wiring, power supply and maintenance of the device.
The EE371 sensor is ready to use and does not require any configuration by the user. The EE371 factory setup
corresponds to the type number ordered. Please refer to the data sheet at www.epluse.com/ee371.
With the help of the free EE-PCS Product Configuration Software and the optional RS232 interface cable (order
code HA010304) or with the EE-PCA Product Configuration Adapter and the according connection cable (order
code HA011063), the user can carry out sensor adjustment and calibration and change the scaling of the
analogue outputs.
Setup and Adjustment
Dimensions
mm (inch)
Scope of Supply
- EE371 – Compact Dew Point Sensor
- Inspection certificate according to DIN EN 10204-3.1
- Quick Guide
Geen (Power LED): flashing
supply voltage applied
Yellow / Red:
not in use
Status LEDs
48
(1.9)
100
(3.9)
28
(1.1)
54 (2.1)
32
(1.3)
75 (3)
40 (1.6)
24 (1)
Ø12 (0.5)
spanner width:
27 or 24
G1/2" ISO or
1/2" NPT
