E-Core HL8860 Скачать руководство пользователя страница 1

HL8860 Audio 2.4GHz RF 

INSTRUCTION MANUAL 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 

E-CORE TECHNOLOGY (CHINA) CO., LTD. 

 

 
 

Federal Communications Commission (FCC) Statement 

You are cautioned that changes or modifications not expressly approved 
by the part responsible for compliance could void the user’s authority to 
operate the equipment 
 
FCC- Class B 
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a communications. However, there is no guarantee that 
interference will not occur in particular installation. If this equipment 
does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures: 

-

  Reorient or relocate the receiving antenna. 

-

  Increase the separation between the equipment and receiver. 

-

  Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected. 

-

  Consult the dealer or an experienced radio/TV technician for help. 

 
 
 
 
 
 
 
 
 
 
 

Содержание HL8860






Отзывы: