See3CAMCU50
Application User Manual
16-04-2014
www.e-consystems.com
| Subject
to change without notice
Page 10 of 15
6.2.1.1 Brightness Control
The Brightness values can be changed from a minimum value of -6 to +6 by moving the slider,
and the exact changes will be reflected immediately in the preview. This brightness control
increases the brightness of See3CAMCU50 . The Default value is 0.
6.2.1.2 Contrast Control
The Contrast values can be changed from a minimum value of 0 to 12 by moving the slider, and
the exact changes will be reflected immediately in the preview. This Contrast control increases
the Contrast of See3CAMCU50 . The Default value is 6.
6.2.1.3
Hue Control
The Hue values can be changed from a minimum value of -120 to 120 by moving the slide bar,
and the exact changes will be reflected immediately in the preview. This Hue control increases
the Hue of the See3CAMCU50 . The Default value is 0.
6.2.1.4
Saturation Control
The Saturation values can be changed from a minimum value of 0 to 8 by moving the slider, and
the exact changes will be reflected immediately in the preview. This Saturation control increases
the Saturation of See3CAMCU50 . The Default value is 4.
6.2.1.5
Sharpness Control
The Sharpness values can be changed from a minimum value of 1 to 5 by moving the slider, and
the exact changes will be reflected immediately in the preview. This Sharpness control increases
the Sharpness of See3CAMCU50 . The Default value is 1.
6.2.1.6
WhiteBalance Control
The Manual White Balance can be selected by uncheck the check box near the white balance
control. The Manual White Balance values can be changed from a minimum value of 1 to 4 by
moving the slider, and the exact changes will be reflected immediately in the preview. The Default
value is 2.
The Auto WhiteBalance can be selected by selecting the check box near the white balance
control. In the manual white balance mode, few preset modes are supported.
The Manual White Balance modes supported are,
•
Daylight
•
Incandescent
•
Fluorescent
•
Cloudy
