PRODUCT INSPECTION PROCEDURE
Disclaimer:
The information in this document is confidential. It may not be reproduced in whole, or in
part, nor may any of the information contained therein be disclosed without the prior consent of e-con
Systems India Pvt Ltd
Format # : EDSG/F/015
Rev# : 1.1
1.
User must look at the test cameras base board LED and choose the result accordingly.
2.
Enter the operators name (one who is performing the tests).
3.
Press the Next button.
Failure case:
1.
If the entered firmware version doesn’t match with the firmware in the board, the software will
throw an error stating the cause.
9.4
Auto Focus Testing
This test is only suitable for Auto-focus cameras.
1.
The Focus chart must be kept ready in the enumeration stage itself. Because for Auto-focus cam-
eras, after the enumeration, the focus test starts immediately after pressing the Next button.
2.
The user is not supposed to do anything. This is an automated test, once completed it will show
the result, waits for the waiting time specified by the user and moves to the next test.
Note:
The setup must be in place before starting the diagnostics.
