14
Pairing
/Syncing
When you
change t
ransmitter
s
or
c
ollar
r
eceiver
s they will need to be paired/
synced to each other for them to communicate with each other.
Pairing for Dog 1 (ON/OFF + S3)
Pairing for Dog 1 (ON/OFF + S3)
1. Turn on the Transmitter.
2. Rotate the
volume
dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter against
the red dot on the collar receiver for more than 5 seconds
un
til
the
solid green light starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S3 button (Front Top)
simultaneously.
5. Listen for confirmation sound from the
c
ollar
r
eceiver.
6. Test the collar receiver to make sure it accepted the new transmitter
code.
Pairing for Dog 2 (ON/OFF + S4)
Pairing for Dog 2 (ON/OFF + S4)
1. Turn on the
t
ransmitter.
2. Rotate the intensity dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter
against the red dot on the collar receiver for more than 5 seconds
until
the solid green light starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S4 button (Front
Bottom) simultaneously.
5. Listen for confirmation sound from the
c
ollar
r
eceiver.
6. Test the collar receiver to make sure it accepted the new transmitter
code.
